Legrand RC3APTCBK Manual do Utilizador descarregar pdf (Página 3)

Step 10. Wire and snap communication Step 11. Insert blanking plugs or neoprene foam

jacks in adapters as shown. block in unused communication ports.

NOTE: To maintain UL Fire Classification, all communication modules or blank inserts (factory or customer supplied) must be UL Listed

communication circuit accessories, and must fit securely in the supplied communication brackets with no visible openings between

the module and bracket. Supplied foam plugs must be used when passing cables through the communication openings.

Step 12. Snap communication jacks or Step 13. Align gasket over receptacle and press

communication port plugs into flange. bead into flange channel.

CAUTION: Gasket must be set in place to provide scrub water seal.

Point Keystone Tab

Away From Bezel.

TracJack Blank (Supplied)

CAUTION: Empty communication ports must be closed off

with foam plugs or TracJack blanks to maintain

fire classification.

Foam Plug (Supplied)

TracJack Sold Separately

Communication Jack

Sold Separately

Ortronics Series II Bezel

and Communication Jack

(Series II Bezel Included;

Series II Modular Inserts

Sold Separately)

Point Keystone Tab

Away From Bezel.

Lower Level Bezel Installation

(Typical for Fiber Installations)

Fiber Jack Sold Separately

Pass & Seymour Activate

™

Bezel and Communication

Jack (Supplied with

RC3ATC and RC3CTC Units)

Point Keystone Tab

Away From Bezel.

1 2 3 4 5 6

Sem comentários

Legrand RC3APTCBK Manual do Utilizador Página 3