Legrand RC3APTCBK Manual do Utilizador descarregar pdf (Página 2)

COMPLETE ASSEMBLY:

Step 6. Cat. Nos. RC3ATC or RC3ARTTC. Step 7. Wire the power circuit.

Wire the Poke-Thru device.

(Can be completed above floor.)

Refer to wiring schematic in Step 8.

Step 8. Connect Poke-Thru conductors according Step 9. If circuit is connected to an isolated ground,

to required device configuration. See apply IG icon on receptacle slide as shown.

schematic below.

CAUTION: Receptacle mounting means not grounded. NOTE: The orange triangle shall only be placed on devices

Grounding wire connection required. For isolated that are wired for isolated ground. See NEC 250-146(d).

ground wiring; connect ground leads to a separate

isolated grounding conductor. See NEC 250-146(d).

Two #6-32 Slide Cover

Mounting Screws

Outlet Box

Cover Plate Screw

WHITE or NEUTRAL

from branch circuit

WHITE

from poke-thru receptacle

BLACK or HOT

from branch circuit

BLACK

from poke-thru receptacle

GREEN (jumper wire)

from poke- thru junction box

GREEN

from poke-thru receptacle

CONVENTIONAL WIRING SCHEMATIC

WHITE or NEUTRAL

from branch circuit

WHITE

from poke-thru receptacle

BLACK or HOT

from branch circuit

BLACK

from poke-thru receptacle

GREEN (jumper wire)

from poke-thru junction box

ISOLATED GROUND

from branch circuit

GREEN

from poke-thru receptacle

ISOLATED GROUND WIRING SCHEMATIC

GREEN or GROUND

from branch circuit

SYSTEM GROUND

GREEN or GROUND

from branch circuit

SYSTEM GROUND

WARNING: Ground wire from junction box must be connected to SYSTEM GROUND.

1 2 3 4 5 6

Comentários a estes Manuais

Sem comentários

Legrand RC3APTCBK Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Legrand RC3APTCBK