Legrand DRD6 v2 Manual do Utilizador descarregar pdf

CUSTOMIZING OPERATION

Modify and Save the Light Levels of a Scene

1. Change lighting levels as desired by pressing or on individual devices.

2. Press and hold the scene button until the LED flashes once (about

2 seconds) to save the new settings.

Removing or Adding Devices to a Scene

1. Press on the DRD6 until the LED begins flashing (about 2 seconds).

2. Press the scene button that you wish to program. LEDs on all wireless Miro

devices begin to flash. You now have 5 minutes to complete this process.

3. To include or exclude a device in the scene press

on the device until the

LED changes color. Yellow flashing LED = Included in the active scene

Green flashing LED = NOT included in the active scene

If you get to a device and it is NOT flashing, see TROUBLESHOOTING.

NOTE: You must include devices that are off in the room scene if you want

them to turn off when that scene is recalled.

4. Return to the DRD6 used in step 1. Press

for 2 seconds — the status LED

stops flashing, then all the status LEDs in the house turn green.

Removing or Adding Devices to the Paddle “On” Function

1. Press on the DRD6 until the LED begins flashing (about 2 seconds).

2. Tap the

paddle on the DRD6. The LEDs on all the Miro wireless devices

begin to flash. You now have 5 minutes to complete this process.

3. To include or exclude a device press

on the device until the LED changes

color. Yellow flashing LED = Included in paddle operation

Green flashing LED = NOT included in paddle operation

If you get to a device and it is NOT flashing, see TROUBLESHOOTING.

4. Return to the DRD6 used in step 1. Press

for about 2 seconds — the status

LED stops flashing, then all the status LEDs in the house turn green.

5. To test, tap

on any room scene controller that is bound to the same room to

switch included devices to on (dimmers go to full bright).

Removing or Adding Devices to the Paddle “Off” Function

1. Press on the DRD6 until the LED begins flashing (about 2 seconds).

2. Tap the

paddle on the DRD6. The LEDs on all the Miro wireless devices

begin to flash. You now have 5 minutes to complete this process.

3. See step 3 above.

4. See step 4 above.

5. To test, tap

on any room scene controller that is bound to the same room to

switch or fade included devices to off (dimmers go to 0%).

1 2 3 4 5 6 ... 10 11

Resumo do Conteúdo

Página 1 - CUSTOMIZING OPERATION

CUSTOMIZING OPERATIONModify and Save the Light Levels of a Scene 1. Change lighting levels as desired by pressing or on individual devices.2. Pr

Página 2 - LOCK ROOM CONFIGURATION

STANDARD OPERATIONThe DRD6 is shipped with most functions preprogrammed for ease of installation andinitialuse.Thissectionsummarizesthedefault

Página 3 - CLEANING

5-FOLD•Print:2-sides•InkColor:Black•Paper:White16lb(60g/msq) Uncoated, prefer recycled stock•Finaltrimsize:20”(Wide)x6”(High).•Fiv

Página 4 - WARRANTY INFORMATION

MORE SCENES Up to 15 scenes are available per room. Each room level controller can access a set of 5 scenes. The DRD6 is assigned to scenes 1-5 when s

Página 5 - Installation Instructions

TROUBLESHOOTINGDuring house ID binding, the LED is not flashing on some devices.• IfLEDissolidgreenbeforeinitiatingHouseIDbinding:The device

Página 6 - UNIT DESCRIPTION

POWER FAIL MEMORYAfter a power failure, all Miro devices automatically return to the state they were in immediately prior to loss of power. All house

Página 7 - INSTALLATION

DRD6 v2Wireless Room Scene ControllerInstallation InstructionsSpecificationsOperatingVoltage . . . . . . . . . . . . . . . . . . . . .120/277VAC,60

Página 8 - SET HOUSE ID

UNIT DESCRIPTION The Miro Decorator DRD6 Wireless Room Scene Controller is a room level scene controller. It provides instant recall of five user-reco

Página 9 - ROOM BINDING

CAUTIONTURN THE POWER OFF AT THE CIRCUIT BREAKER BEFORE INSTALLING THE DIMMER.INSTALLATIONFor ease of installation, manufacturer recommends use of a

Página 10 - STANDARD OPERATION

SET HOUSE IDAll Miro wireless devices installed in the same home must acquire the same unique House ID before use. This process is known as house bind

Página 11

ROOM BINDINGAfter the House ID is set in the DRD6, you create a room by binding devices to the DRD6. You can also add the DRD6 to an existing room. Wh