Legrand CCBB Series Floor Boxes Manual do Utilizador descarregar pdf (Página 2)

6. Screed to top of floor box surface. Hand troweling

recommended near box edges.

7. Remove mudcap.

NOTE: Mud Cap is NOT a load bearing surface and additional

material should be placed into the mud cap to bear

the appropriate traffic loads.

CAUTION: Do not dislodge or shift box with jobsite traffic or

concrete vibrations.

9. If tunnels are to be used, remove tunnel by removing (2)

#8-32 screws. Remove the spacer plate located behind

the tunnel and reinstall the tunnel.

8. Determine required location and mount divider,

Cat No. CCBBS-DIV on device bracket.

5. Reinstall mudcap.

10. Locate and pull wires and cables.

Polished Concrete

Floor Spacer: Spacer

must be installed prior

to pouring concrete.

1 2 3 4

Sem comentários

Legrand CCBB Series Floor Boxes Manual do Utilizador Página 2