Legrand SWP264ABBPCC5 Manual do Utilizador descarregar pdf

2. Twist screw driver until wall plate pops off snap.

3. Repeat steps 1 and 2 on the other hole in

bottom of wall plate.

4. Lift wall plate off plastic sub-plate.

REMOVAL OF PLASTIC SUB-PLATE

1. Back out device mounting screws

(about 1/2 inch, removal not required).

2. Disconnect sub-plates by pressing

on snaps with a pen tip or other

small object where indicated. (Figure 6)

3. Pull apart.

Advertencia: ¡Antes de instalar/remover, desconecte

el suministro eléctrico! ¡Riesgo de descarga eléctrica!

INSTALACIÓN

1. Desconecte el suministro eléctrico.

2. Retroceda los tornillos de montaje del dispositivo (1/2 pulgada

aproximadamente, no se requiere la remoción). (Figura 1)

3. Deslice las placas base de plástico entre la pared y el dispositivo. (Figura 2)

4. Junte a presión las dos placas base.

5. Apriete los tornillos de montaje del dispositivo, verifique que los orificios

del fleje del dispositivo estén alineados sobre las guías de las placas base

de plástico.

Installation Instructions

Screwless Wall Plates

P/N 340811 Rev. B

WARNING: Disconnect power before

installation/removal! Risk of electrical shock!

INSTALLATION

1. Disconnect power.

2. Back out device mounting screws (about

1/2 inch, removal not required). (Figure 1)

3. Slide plastic sub-plates between the wall

and the device. (Figure 2)

4. Click the two sub-plates together.

5. Tighten device mounting screws, be sure

device strap holes line up on the guideposts

on the plastic sub-plates.

6. Mount wall plate – make sure up-arrow on the

backside of the cover plate is facing up. (Figure

3) Snap wall plate into place. (Figure 4)

TIPS:

• Wall surface must be

smooth (no excess plaster

or paint drips).

• Do not over tighten device

screws, just snug so device

will not move.

• Electrical box must be flush

or recessed in wall.

REMOVAL OF WALL PLATE

1. Insert flat screw driver into one hole at bottom of wall plate.

(Figure 5)

Figure 1

Figura 1

Figure 2

Figura 2

Figure 3

Figura 3

Figure 4

Figura 4

Figure 6

Figura 6

Instrucciones de Instalación

Placa de Pared Sin Tornillo Con Placa Base de Plástico

Figure 5

Figura 5

1 2

Screwless Wall Plates 1

Resumo do Conteúdo

Página 1 - Screwless Wall Plates

2. Twist screw driver until wall plate pops off snap.3. Repeat steps 1 and 2 on the other hole inbottom of wall plate.4. Lift wall plate off plastic s

Página 2

6. Monte la placa de pared – verifique que la flecha hacia arriba en la placa-cubierta está dirigida hacia arriba. (Figura 3) Sujete a presión en su s

Modelos relacionados SWP264BK | SWP264BR | SWP26BB | SWP264BB | SWP264BC | SWP26BC | SWP264DBBPCC5 | SWP264GRY | SWP264MH | SWP264MA | SWP264SS | SWP264WA | SWP26ABBPCC10 | SWP26BR | SWP26DBBPCC10 | SWP26GRY | SWP26MH | SWP26MA |

Comentários a estes Manuais

Sem comentários

Legrand SWP264ABBPCC5 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Legrand SWP264ABBPCC5. Legrand SWP264ABBPCC5 User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados SWP264BK | SWP264BR | SWP26BB | SWP264BB | SWP264BC | SWP26BC | SWP264DBBPCC5 | SWP264GRY | SWP264MH | SWP264MA | SWP264SS | SWP264WA | SWP26ABBPCC10 | SWP26BR | SWP26DBBPCC10 | SWP26GRY | SWP26MH | SWP26MA |

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Legrand SWP264ABBPCC5